B 604 - Sliding screen door stamped aluminum corner with high density polyethlene roller, 1 per pkg.

This sliding screen door corner assembly is used on Jim Waltersdoors and several other manufacturers. It is an all-in-one corner and roller combination. It is made of stamped aluminum with an adjustment screw and center grooved spring activated high density polyethlene roller attached at the end of the bottom leg. The roller is 1 inch in diameter. The corner fits into the sliding screen door frame holding the bottom or top rails and the side stiles together.
  • 1 inch high density polyethlene roller
  • 9/32 inch wide roller
  • Concave (Grooved) roller
  • Adjusting Screw
  • Stamped Aluminum
  • Corner legs are 1-1/16 inches wide by 3/8 inches thick
  • Corner holds the top or bottom rails to the side stiles together
  • Used by Jim Walters and several other manufacturers
Mount On:
Where To Buy