D 1509 - Single 1-1/4 inch Steel Ball Bearing Roller, "F" Tab Style, Adjustable, 1 Pack
Description
This is an F-tab patio door roller assembly with a 1-1/4 in. concave ball bearing roller that replaces the Old Style design. Used on Sun Valley, Fullview, Glasco and a variety of other sliding patio door manufacturers. When the corner screw passes through the "F" tab the assembly is captured by the side stile and bottom rail as the screw draws the two sides together. The housing is 9/16 in. wide and 1-9/32 in. tall, with a rear adjusting screw.
- Used by Sun Valley, Fullview, Glasco and a variety of other metal sliding patio door manufacturers
- When the corner screw passes through the F-tab the assembly is captured by the side stile and bottom rail as the screw draws the two sides together
- Rear adjustment screw
- Stamped steel housing with a ball bearing rollers
- 1-1/4 in. concave steel roller
- Replaces old style F style assemblies that slid into an extruded channel in the bottom rail
- A Phillips head screwdriver is required for installation
- For further dimensional information, please see the line drawing
