D 1515 - 1-1/4 in., Steel, Sliding Door Roller Assembly with Steel Ball Bearings (Single Pack)
Description
This is an F-tab patio door roller assembly with a 1-1/4 inch concave steel ball bearing roller. When the corner screw passes through the F-tab the assembly is captured by the side stile and bottom rail as the screw draws the two sides together. The housing is 3/4 inch wide and 1-1/8 inch tall with a rear adjusting screw. Used by Christian Porter, Fullview and a variety of other patio door manufacturers.
- Used by Christian Porter, Fullview and a variety of other patio door manufacturers
- When the corner screw passes through the F-tab the assembly is captured by the side stile and bottom rail as the screw draws the two sides together
- 1-1/4 inch diameter ball bearing roller
- Stamped steel housing and steel roller
- Rear adjustment screw
- Allows the door to roll smoothly
- A Phillips head screwdriver is required for installation
- Please refer to the line art drawing and compare with your original item before purchasing
