D 1584 - 1-1/4 in. Steel Ball Bearing Sliding Door Roller Assembly, for Northrup (Single Pack)
Description
This is a F-tab patio door roller assembly with a 1-1/4 inch concave steel ball bearing roller. When the corner screw passes through the F-tab the assembly is captured by the side stile and bottom rail as the screw draws the two sides together. The housing is 11/16 inch wide and 1-3/16 inch tall with a dimple width of 7/8 inch used by Northrup and a variety of sliding patio door manufacturers.
- Used by Northrup and a variety of sliding patio door manufacturers
- When the corner screw passes through the F-tab the assembly is captured by the side stile and bottom rail as the screw draws the two sides together
- 1-1/4 inch diameter concave ball bearing roller
- Stamped steel housing and steel rollers
- Used on metal framed sliding patio doors
- Easy to install
- A Phillips head screwdriver is required for installation
- Please refer to the line art drawing and compare with your original item before purchasing
