D 1918 - 1-1/4 in. Steel Ball Bearing Sliding Door Roller Assembly (Single Pack)
Description
This is a F-tab patio door roller assembly with a 1-1/4 inch concave or grooved steel ball bearing roller. When the corner screw passes through the F-tab the assembly is captured by the side stile and bottom rail as the screw draws the two sides together. The housing is 11/16 inch wide and 1-3/16 inch tall with a 7/8 inch dimple width. Used by Lupton and a variety of other patio door manufacturers.
- Used by Lupton and a variety of other sliding patio door manufacturers
- F-tab housing
- 1-1/4 inch diameter concave steel roller
- Stamped steel housing with ball bearing roller
- Mounting tabs on each end