TH 23029 - Casement Operator, 13-1/2 inch Single Arm, RH, Bronze, 1 per pkg.

This casement operator is constructed of a diecast body, a hardened steel arm (with a steel guide button at 9/16 in. in diameter), and a case-hardened worm gear mechanism that comes in a corrosion-resistant plating. It features a square-shaped housing and an operator crank handle, and comes finished in a bronze colored baked-on enamel finish. This casement operator is right-handed, determined when viewing the window from the outside looking in. This operator is a surface-mounted crank-out design for casement windows and mounts with six fasteners. This high-end quality operator exhibits minimal gear lash, with positive and smooth operation. For the opposite handing of this operator, see Prime-Line part TH 23026-1. Installation fasteners and a set screw (for affixing the crank handle onto the operator spindle) are included with each operator. This operator provides a full 90-degree opening and disconnects easily from the sash. Use Prime-Line part TH 22397 for replacement track.

• Used to replace worn or missing single arm casement operators (right hand - as viewed from the exterior looking in)
• The handing for this casement operator is determined by viewing the operator from the outside looking in
• Hardened steel arm with high pressure diecast zinc case, crank handle and knob
• The case and crank of this operator come in a bronze-colored baked enamel finish. Drive worm and gear are protected with a corrosion-resistant finish that is gray in color
• Easy to install with the installation instructions, fasteners, and a few simple tools