U 10750 - Lock and Door Reinforcer, 5-1/2 in., 2-3/8 in. x 1-3/4 in., Classic

This lock and door reinforcer is constructed of brass and comes in a classic bronze painted finish. It fits 1-3/4 in. thick doors. Assists in preventing forced entry by reinforcing the weak spot of an entry door, and it can be used on both metal and wood doors. Accommodates key-in knob locksets, deadbolts and combination locksets on doors that have 2-1/8 in. bore sizes, with a backset of 2-3/8 in, and that are separate from each other by 5-1/2 in. from center to center. The width of this door guard is 3-7/8 in. and it is 10-7/8 in. tall. Door reinforcers are easy to install and they are used by many. All installation fasteners are included with this item.
  • Used to reinforce and repair doors to aide in preventing forced entry
  • Fits 1-3/4 in. thick doors, 2-1/8 in. bores, 2-3/8 in. backset, 5-1/2 in. hole centers, 3-7/8 in. width x 10-7/8 in. height
  • For use on doors 1-3/4 in. thick that have mortise or drive-in latches
  • Solid brass in a classic bronze finish
  • Pre-punched for mounting
  • Mounting hardware included
  • A Phillips head screwdriver is required for installation
  • For further dimensional information, please see the line drawing
Hole Center to Center:
Door Thickness:
Reinforcer Width:
Bore Size:
Reinforcer Height:
Reinforcer Edge Type:
Where To Buy